Viscosifiers & Rheology Modifiers
Polyacrylamide (PAM) Emulsion for Drilling Fluids
A water-soluble, high-molecular-weight polyacrylamide emulsion for drilling fluids. Through adsorption and bridging on cuttings and wellbore surfaces, it improves viscosity, cuttings transport and wellbore stability in oil, gas and shale-gas drilling.
Polyacrylamide (PAM) Emulsion for Drilling FluidsAll products
- 01Viscosifying and cuttings transport in water-based muds
- 02Shale stabilization and wellbore protection
- 03Oil, gas and shale-gas drilling operations
| Item | Specification |
|---|---|
| Polymer Mass Fraction w/% ≥ | 25 |
| Intrinsic Viscosity (30 °C) /(dL/g) ≥ | 3.5 |
| Relative Molecular Weight ≥ | 100×10⁴ |
| Degree of Anionicity | Anionic products: absolute deviation from the nominal value not greater than 3%, or as per customer requirements; non-ionic products: not greater than 5% |
| Acrylamide Monomer Mass Fraction w/% ≤ | 0.1 |
| Dissolution Time (1 g/L) /min ≤ | 30 |
| Water Insolubles Mass Fraction w/% ≤ | 1.0 |
Add the emulsion slowly into the circulating mud under agitation; a typical starting dosage is 0.1%-0.5% by weight. Fully compatible with common water-based mud additives.
200 L plastic drums standard; IBC or customized export packaging available on request.
ЗАПРОС ПО ПРОДУКТУ
Запросить информацию о продукте
Polyacrylamide (PAM) Emulsion for Drilling Fluids
RELATEDViscosifiers & Rheology Modifiers